Why your Windows 11 mouse and keyboard turn off when starting your PC and how to fix it

Share
A Windows 11 mouse and keyboard placed on a desk next to a PC in a home office setting.

If your mouse and keyboard stop working when you start your Windows 11 PC, it’s usually because power settings, BIOS/UEFI configurations, or USB port issues prevent these devices from powering on during boot. Adjusting Windows power options, updating drivers, and checking BIOS settings typically fix this. Follow the step-by-step guide below to restore your mouse and keyboard without causing other problems.

Why does my mouse and keyboard turn off when I start my Windows 11 PC?

When your mouse and keyboard lose power or disconnect during startup, common causes include Windows power management features that suspend USB devices to save energy, USB selective suspend settings that temporarily turn off USB ports, and BIOS or UEFI settings that disable or limit USB device initialization during boot. Fast Boot options can skip USB initialization steps, and disabled USB Legacy Support in BIOS can prevent USB peripherals from powering on early, making them appear off or unresponsive during startup.

How do Windows 11 power settings affect USB devices during boot?

Windows 11 includes power-saving features that can turn off or suspend USB ports when they aren’t actively used. USB selective suspend is one such feature that may turn off power to your mouse and keyboard during startup or when Windows thinks they’re idle. This can cause your devices to disconnect briefly or fail to initialize until Windows fully loads. These settings mostly affect USB 2.0 and 3.0 ports and can be changed in the Power Options control panel to prevent USB ports from suspending automatically at startup.

Could BIOS or UEFI settings cause this issue?

Yes. BIOS or UEFI firmware settings can control whether your mouse and keyboard get power early in the boot process. USB Legacy Support allows USB devices to work in pre-Windows environments like BIOS menus or boot loaders; disabling it can make devices unresponsive until Windows loads. Fast Boot speeds up startup by skipping some USB initializations, which can cause your mouse and keyboard not to power on immediately. Enabling USB Legacy Support and adjusting or disabling Fast Boot may fix these startup power issues.

How can I fix my mouse and keyboard turning off when starting my PC?

  1. Adjust Windows power settings:

You need Administrator privileges for these steps.

  1. Open Control Panel and select Power Options.
  2. Click "Change plan settings" next to your active power plan.
  3. Click "Change advanced power settings."
  4. Expand "USB settings," then "USB selective suspend setting."
  5. Set it to "Disabled" for both "On battery" and "Plugged in" if available.
  6. Save changes and restart your PC.
  7. Update your mouse and keyboard drivers:
  8. Open Device Manager.
  9. Expand "Mice and other pointing devices" and "Keyboards."
  10. Right-click each device and select "Update driver," then "Search automatically for updated driver software."
  11. Check BIOS/UEFI settings:
  12. Restart your PC and enter BIOS/UEFI setup (usually by pressing Delete, F2, or another key during startup).
  13. Find USB configuration settings.
  14. Make sure "USB Legacy Support" or "Legacy USB" is enabled.
  15. Disable or adjust "Fast Boot" if it’s causing USB initialization problems.
  16. Save BIOS settings and reboot.
  17. Test hardware:
  18. Try different USB ports, preferring USB 2.0 ports first.
  19. Swap cables if possible.
  20. If available, test with a different mouse and keyboard to rule out hardware faults.
A Windows 11 mouse and keyboard shown alongside a monitor displaying Control Panel power options for troubleshooting.

To identify the cause, try these checks:

  • Connect your mouse and keyboard to different USB ports, including both USB 2.0 and 3.0, to rule out port problems.
  • Boot into Safe Mode by holding Shift while clicking Restart, then select Troubleshoot > Advanced options > Startup Settings > Restart, and choose Safe Mode. If your devices work there, the issue is likely software-related.
  • Test with a different mouse and keyboard. If the problem persists, it may be hardware-related.
  • Access BIOS/UEFI menus during boot. If your mouse and keyboard respond there, firmware and hardware are probably fine. If not, BIOS settings or hardware may be the cause.

What can I do to prevent this mouse and keyboard power issue in the future?

Keep your Windows 11 system and device drivers updated, as updates often fix compatibility and power management bugs. Regularly review power management settings to keep USB selective suspend disabled if you depend on USB devices during startup. In BIOS, ensure USB Legacy Support stays enabled and adjust Fast Boot settings to allow proper USB initialization. Avoid using USB hubs or extension cables that can cause power interruptions, and connect essential peripherals directly to your PC’s USB ports.

Conclusion

If your mouse and keyboard stop working during Windows 11 startup, start by adjusting Windows power settings and updating drivers. Then check BIOS settings like USB Legacy Support and Fast Boot. If the problem continues, test different USB ports and devices to narrow down hardware or firmware issues. Regular updates and proper BIOS configuration will help prevent this problem from recurring.

Frequently Asked Questions

Why does my mouse work after Windows starts but not during boot?

This usually happens because BIOS or UEFI settings like USB Legacy Support are disabled, or because Windows power management temporarily turns off USB ports during startup. The mouse only powers on once Windows finishes loading.

Can Fast Boot cause my USB devices not to work at startup?

Yes. Fast Boot skips some USB initialization steps to speed up startup, which can prevent USB devices like your mouse and keyboard from powering on immediately.

Is it safe to disable USB selective suspend in Windows 11?

Yes. Disabling USB selective suspend stops Windows from turning off USB ports to save power, which can help fix device recognition problems. It’s generally safe but may slightly increase power use.

Read more